This equipment is ideal to process a variety of prostheses such as Crown (Bridge), Hybrid Abutment, Partial Denture, etc. It is optimized for
one-day prosthesis (Lithium Disilicate, Nanocomposite) and can be easily installed in narrow spaces as it is built-in All in One system.
Labial (or Buccal) side texture and undercut area precision processing minimize post-processing time. You can easily exchange from disk to CAD block as it uses cartridge type materials.
By choosing one from 2 modes of roughing process (U peeling milling,
and Parallel milling), you can process glass ceramic materials more effectively.
An external compressor is not required, and all additional devices
(Dust Collector, Coolant System) are built inside the table to overcome
installation space constraint and minimize noise.
** German Renfert SILENT compact CAM model is used (optional)
Through groove, labial side texture precision processing using
ARUM's exclusive 0.3mm tool for Zirconia, you can process
prostheses close to natural teeth.
The wireless automatic calibration has improved the usability and the 3mm probe has improved the accuracy, maintaining the best condition.
With its intuitive icons, even beginners can control easily.
Simple touch control design has been applied.
Model | 5X-300pro | |
---|---|---|
Axis | 5-Axis | |
Processing | Wet and Dry | |
Spindle Power | AC 0.5kw | |
Max. RPM | 80,000 | |
A.T.C | 12 | |
Tool Shank (mm) | 4 | |
Motor | Stepping Encoder | |
Drive Mechanism | Ball Screw | |
Way System | Linear Guide | |
Machine Size (W*D*H) | 568*638*645mm | |
Total Size (W*D*H) | 568*641*1583mm | |
Weight (Machine / Table) | 90kg / 65kg | |
Travel | X,Y,Z axis | 167*119.8*94mm |
A axis / B axis | ±30˚ / 360˚ |
Material | Code | Ø | Size | Material | Code | Ø | Size |
---|---|---|---|---|---|---|---|
Zirconia | ZB-46 | 2 | D2.0*L18*50 | Glass ceramic | DG-52 | 2.5 | D2.5*L13*44.5 |
Zirconia | ZB-47 | 1 | D1.0*L16*50 | Glass ceramic | DG-53 | 1.5 | D1.5*L10*44.5 |
Zirconia | ZB-48 | 0.6 | D0.6*L10*45 | Glass ceramic | DG-54 | 1 | D1.0*L10*44.5 |
Zirconia | ZB-65 | 0.3 | D0.3*L12*45 | Glass ceramic | DG-55 | 0.6 | D0.6*L08*41 |
PMMA | MOB-56 | 3 | D3.0*L20*50 | Flat endmill | ZF-70 | 1.7 | D1.7*L18*50/td> |
PMMA | PB-49 | 2 | D2.0*L18*50 | Flat endmill | ZF-75 | 0.6 | D0.6*L08*45 |
PMMA | PB-50 | 1.5 | D1.5*L14*47 | T-Cutter | TC-80 | 1.8 | D1.8*L08*45 |
PMMA | PB-51 | 1 | D1.0*L10*44 | T-Cutter | TC-98 | 2 | D2.0*L08*45 |